Foot-Switch TWIN-CAT
€ 95,00
Foot-Switch to start/stop TWIN-CAT
TWIN-CAT-2, Base-Unit
TWIN-CAT-2, Base-Unit
€ 1.095,00
Features
- Your choice of core holders
- Handles labels up to 270mm wide
- Roll diameter capacity up to 220mm
- Speed up to 125cm/sec
Shipping within 1 - 5 days
Description
The Twin-CAT-2 is a fast and easy way to deliver label rolls the way you want them.
With two motors and your choice of core holders, you have maximum versatility in setting up the operation you need. Both spindles can rewind, unwind and be controlled (direction and torque) independently.
Many possible applications
- Inside wound to outside wound
- Reverse the order of serialized labels
- Rewind labels on a different core size
- Wind small rolls of labels from larger ones
- Strip matrix from die-cut labels inline with your printer
- Rewind a specific quantity of labels with the inspection and pre-set counter options
P/N: LMR016 – BASE UNIT (without any core holder)
To choose the Core Holder, pick two from the list below. (Mix or Match)
| LMX460 | 1-INCH CORE HOLDER | 25.4mm standard shaft and flanges | 155mm Width | 2 flanges |
| LMX461 | STANDARD CORE HOLDER | Standard Shaft with vanes and flanges. Specify 38, 40, 44, 70, 46 or 100 mm | 155mm width | 2 flanges |
| LMX462 | 10-INCHES CORE HOLDER | Shaft with vanes in 255mm lenght. Specify 38, 40, 44, 70, 46 or 100 mm | 255mm width | 2 flanges |
| LMX463 | ACH-TWIN* | Adjustable core holder shaft for cores from 25mm to 101mm | 155mm width | 1 flange |
| LMX464 | CHUCK C-76170 | Quick-Chuck shaft in 170mm lenght and inner flange. Specify 38, 40, 44, 70, 76 or 100mm | 170mm width | 1 flange |
| LMX465 | CHUCK C-76220 | Quick-Chuck shaft in 220mm lenght and inner flange. Specify 38, 40, 44, 70, 76 or 100mm | 220mm width | 1 flange |
| LMX466 | CHUCK C-76270 | Quick-Chuck shaft in 76mm core diameter and 170mm lenght and flange | 270mm width | 1 flange |
| LMX467 | CHUCK C-100170 | Quick-Chuck shaft in 100mm core diameter and 170mm lenght and inner flange | 170mm width | 1 flange |
| LMX468 | CHUCK C-100220 | Quick-Chuck shaft in 100mm core diameter and 220mm lenght and inner flange | 220mm width | 1 flange |
| LMX469 | CHUCK C-100270 | Quick-Chuck shaft in 100mm core diameter and 270mm lenght and inner flange | 270mm width | 1 flange |
*The ACH-TWIN core holder cannot be mixed with another type.
Options & attachments
Pre-Set Counter with Inspection Bracket for TWIN-CAT
€ 539,00
Pre-Set Counter with adjustable sensor sensitivity, pre-mounted on the inspection bracket. mounted on the sideon of the TWIN-CAT-2,
Inspection Bracket for TWIN-CAT
€ 150,00
Bracket with 2 rollers, mounted on the side of the TWIN-CAT-2, Select this option for matrix removal on OKI-type Colour printer.
Quick-Chuck C76270 Shaft for TWIN-CAT
€ 420,00
Quick-Chuck 270mm length for cores in 76mm and inner-flange for use on TWIN-CAT-2.
Quick-Chuck C76220 Shaft for TWIN-CAT
€ 350,00
Quick-Chuck 220mm length for cores in 76mm and inner-flange for use on TWIN-CAT-2.
Quick-Chuck C76170 Shaft for TWIN-CAT
€ 290,00
Quick-Chuck 170mm length for cores in 76mm and inner-flange for use on TWIN-CAT-2.
Adjustable Core Holder (ACH) Shaft for TWIN-CAT
€ 180,00
Adjustable Core Holder for use on TWIN-CAT-2. Can NOT be mixed with another Shaft type, 2 units required to complete your TWIN-CAT Max Label Width of 155mm For cores between 25 and 101mm
10-Inches-Shaft for TWIN-CAT
€ 150,00
10-inches standard shaft with vanes and flanges for use on TWIN-CAT-2 Max Label Width : 255mm Standard with vanes for cores in 76mm but available for 38/40/44/50/70/100 mm cores
Standard Shaft for TWIN-CAT
€ 75,00
Standard shaft with vanes and flanges for use on TWIN-CAT-2 Standard with vanes for cores in 76mm, but available for 38/40/44/50/70/100mm cores as well. Please specify at order.
1-Inch-Shaft for TWIN-CAT
€ 75,00
25,4mm (1-inch) standard shaft and flanges for use on TWIN-CAT-2
Related products
DISTRI-COUNT-ST-RW
€ 1.735,00
- With integrated Label Rewinder and base-plate
- Roll capacity up to 220mm
- Supports 38, 40, 44, 70, 76mm core diameters
- Max Label Length of 200mm
RRC-330-STANDARD
€ 1.650,00
- Handles labels up to 152mm wide
- Roll capacity up to 330mm
- Available for 38, 40, 44, 70, 76 and 100mm cores
- Speed up to 235cm/sec
